NE bucket elevator

NE type hoist is composed of traction plate chain, drive device, upper section, middle casing, hopper and lower section.

custom

150-5445-08687*24 hours hotline

Guide installation

Chauffeur pick-up

After-sales service

Product Introduction

1. NE type hoist is composed of traction plate chain, drive device, upper section, middle casing, hopper and lower section.

2. according to the structure of the drive device is divided into motor + reducer form and planetary cycloidal pin gear reducer form two structures. According to the layout position, it is divided into two layout positions: left installation and right installation.

3. the middle shell is divided into two kinds: with guide rail and without guide rail. It is divided into standard middle casing and non-standard middle casing according to length.

4. The lower section is tightened by a drop box. After installation, fill the box with weight.

Product features

01The inflow type feeding is adopted, so that the extrusion and collision between the various parts of the conveyor and the material are rarely occurred, the operation is stable and the maintenance is convenient.
02The conveying chain uses the surface contact of the plate chain to replace the point connection of the traditional bucket chain, so that the service life is greatly improved, and the conveying chain life can reach more than five years.
03Because of the inflow feeding, gravity induced unloading, low bucket line speed is high (15-30m/min), the power without feedback phenomenon is only equivalent to about 40% of the ordinary ring chain bucket elevator.
04High operating rate, trouble-free operation can reach more than 30,000 hours.
05Large Transport capacity, transport range 15-800m3/h.
06Good sealing, less environmental pollution.
07Easy operation and maintenance, less wearing parts.

Specification parameter

Model	Transport capacitym3/h	Bucket speed m/s	Rotational speedrpm	Material size mm	hopper
Model	Transport capacitym3/h	Bucket speed m/s	Rotational speedrpm	Material size mm	capacity L	Bucket width mm	Pitch of buckets mm
NE15	15	0.5	15.54	<40	2.5	250	203
NE30	32	0.5	16.45	<50	7.8	300	305
NE50	60	0.5	16.45	<50	15.7	300	305
NE100	110	0.5	14.13	<70	35	400	400
NE150	170	0.5	14.13	<70	52.2	600	400
NE200	210	0.5	10.9	<100	84.6	600	500
NE300	320	0.5	10.9	<100	127.5	600	500
NE400	380	0.5	8.3	<120	182.5	700	600
NE500	470	0.5	7.1	<120	260.9	700	700
NE600	600	0.5	7.1	<120	330.2	700	700
NE800	800	0.5	6.2	<140	501.8	800	800